All Tools
O
Dev ToolsFreeOpen Source
OPENOCD
Open on-chip debugger for JTAG, SWD, flashing, and GDB
GPL-2.0
ABOUT
Flashing and debugging MCUs often needs a closed vendor probe stack. OpenOCD is the open JTAG/SWD daemon that talks to adapters and GDB so teams halt, flash, and inspect chips without a proprietary tool.
INSTALL
brew install open-ocdINTEGRATION GUIDE
1. Flash firmware onto an STM32 or ESP32 over a cheap JTAG adapter
2. Attach GDB to a halted Cortex-M core during bring-up
3. Script reset, halt, and memory dumps in CI for hardware tests
4. Debug SWD boards that a vendor IDE does not support
TAGS
cembeddedjtagswddebuggerfirmwaregdbflashing